多年來，射線防護門的應用越來越廣泛，這與它的特性和性能是分不開的。我們憑借優質的產品和服務，一直受到廣大消費者的好評，下面小編就為大家整理出幾點關于防盜門的作用知識:
　　Over the years, the application of radiation protection door is more and more extensive, which is inseparable from its characteristics and performance. With our high-quality products and services, we have been well received by the majority of consumers. The following editor will sort out some knowledge about the function of anti-theft doors for you:
　　1、平開門:平放在打開的門被設置在一邊的門框,下固定鉸鏈,鉸鏈的門和門框連接在一起,使門鉸鏈軸旋轉打開門打開和關閉的門主要由框架、門板、鉸鏈、門螺栓,壓實機理、停止緩沖裝置,等等,可以安裝電機傳動,電動或液壓推桿或其他驅動門在墻上的影響的過程中,一般將停止緩沖裝置,門內側粘接密封橡膠墊，與門框合縫，起到密封和緩沖作用，門的結構開啟。
　　1. Door opening: the door frame that is placed horizontally on one side of the open door, and the hinge is fixed at the bottom. The hinge door and the door frame are connected together, so that the hinge axis of the door rotates to open and close the door. The door opening and closing mainly consists of the frame, the door plate, the hinge, the door bolt, the compaction mechanism, the stop buffer device, etc., which can be installed in the process of motor drive, electric or hydraulic push rod or other driving effects of the door on the wall, Generally, the buffer device will be stopped, the inner side of the door will be bonded with the sealing rubber gasket, and the door frame will be seamed to play the role of sealing and buffering, and the structure of the door will be opened.
　　2. 推拉防護門:推拉的門運動方向和垂直方向平行與墻體、放置高于或低于身體的旅行機制在門口輕門安裝在頂部,可以掛開推拉的門,門驅動機構安裝在下面,根據驅動推和拉的底部的門推拉的門主要由門板、驅動裝置、限位開關、把手、導軌和停止緩沖裝置,如果你需要力量,一般采用電機驅動，射線屏蔽和行走時應考慮吊車行走機構相似的門后透光設計，一般情況下，門板和墻體的孔徑根據輻射程度不同，門與墻體搭接寬度不同，效果較好。
　　2. Push and pull protective door: the moving direction and vertical direction of the push-pull door are parallel to the wall, and the travel mechanism placed higher or lower than the body is installed on the top of the light door at the door, the push-pull door can be hung open, and the door driving mechanism is installed on the bottom. According to the driving push and pull of the bottom door, the push-pull door is mainly composed of door plate, driving device, limit switch, handle, guide rail and stop buffer device, If you need strength, it is generally driven by electric motor. When ray shielding and traveling, the light transmission design behind the door similar to the crane traveling mechanism should be considered. Generally, the aperture of the door plate and the wall is different according to the radiation degree, and the overlapping width of the door and the wall is different, so the effect is better.

　　屏蔽效應:外面的不銹鋼板,一般的大小是21.50厘米高*寬130厘米* 10厘米厚,內部設置與龍骨,內襯屏蔽板2 - 3毫米(輻射計根據不同的部門有不同的材料,厚度要求),以便工作人員的劑量符合國家管理目標值
　　Shielding effect: the outer stainless steel plate is generally 21.50cm in height * 130cm in width * 10cm in thickness. The inner part is set with keel, and the inner lining shielding plate is 2-3mm (the radiometer has different materials and thickness requirements according to different departments), so that the dose of the staff can meet the national management target value
　　連鎖功能:防護門與輻照裝置的電源連接，使射線機處于開啟狀態時不能打開。當射線裝置打開時，防護門打開，2秒內立即關閉。
　　Interlock function: the protective door is connected with the power supply of the irradiation device, so that the ray machine cannot be opened when it is in the open state. When the ray device is opened, the protective door is opened and closed immediately within 2 seconds.
　　控制要求:防護門開關可由電腦控制，按鈕控制和手動控制，支持總線接口，在電腦上顯示門的狀態，在門上顯示LED的工作狀態。
　　Control requirements: the protective door switch can be controlled by computer, button control and manual control, support bus interface, display the status of the door on the computer, and display the working status of LED on the door.